Taking Care of the Thermostat

 

The thermostat is the temperature control mechanism of the HVAC system. It sees to it that the living space is adequately cooled or heated, and the thermostat has to run accurately. A variance between settings, where the thermostat is set at one temperature but actually maintains a higher level of heat, can result in substantially increased energy bills. This is a primary reason why attention should be given to the maintenance of the thermostat.

 

Review the Calibration

 

Good calibration assures that the proper temperature is being maintained. If there is a variation between the reading on the thermometer and the reading on the thermostat, there may be some difficulty with the calibration. This will mean that the thermostat will have to be replaced. A homeowner has to be careful about the wiring of the thermostat, and be certain that the replacement thermostat has all the necessary wires attached to it. The new thermostat by the way must also have the same little rating as the one it is replacing. Checking to see if the thermostat is able to turn on and turn off the heating system is a final check to be sure that it is running properly.

 

Increase the Energy Efficiency

 

A good thermostat can make energy efficiency easier and maintain lower utility bills. Once a thermostat has to be replaced, a programmable model should be the new one. These models of thermostats can be programmed to lower the heating temperature in winter at times when no one is in the house, and then automatically increase the heat when the family is ordinarily at home. This little variation assures that only the heat that is necessary at a given time is in the house. It furthermore helps keep utility costs down because less energy is being expended. Maintenance of the thermostat doesn’t take a considerable amount of time nor any advanced expertise. It requires staying alert to any sudden variations in temperature in which the house is actually warmer than the temperature registered.