Optimizing the HVAC

 

The HVAC system in a house consumes a considerable amount of energy and is the primary expense in any utility bill. A homeowner can make better use of energy and keep utility costs under control by doing what is necessary to optimize the HVAC system. Before a person cringes at potential costs, he or she should look at the ways of optimizing the HVAC that really aren’t that expensive.

 

Outside the System

 

Not a very tactic used to improve the air conditioning service or heating service in the house requires major overhauls to the HVAC system. Some efficiencies can actually be done outside of the equipment. Ceiling fans have a reputation for reducing cooling costs dramatically. When this is combined with thermostats thing to be program, the energy use and costs drop like a stone. Drafts are a problem that occur in the wintertime. Cold air comes into the house and that causes more energy to be expended to increase heat. Double pane windows can help keep the cold air out and insulation placed around window frames and doorframes also keep the whistling winds from invading the living space. Space heaters and under floor heating mats will allow for necessary heat without taxing the HVAC system. The best thing about all the recommendations is that they really are not that expensive. In fact, some of them are strategies recommended by green energy advocates who want to reduce carbon footprints.

 

Lowering the Cost

 

The cost-effectiveness of these ideas should be felt almost immediately. To gauge the full impact homeowner needs to check how much the energy use was the month prior to initiating the changes, and the months immediately following. There should be a noticeable decrease in kilowatt hours (kwH) or British thermal units (BTUs). All of these complement the HVAC system, allowing it to provide only what is needed in air cooling or heating.

Taking Care of the Thermostat

 

The thermostat is the temperature control mechanism of the HVAC system. It sees to it that the living space is adequately cooled or heated, and the thermostat has to run accurately. A variance between settings, where the thermostat is set at one temperature but actually maintains a higher level of heat, can result in substantially increased energy bills. This is a primary reason why attention should be given to the maintenance of the thermostat.

 

Review the Calibration

 

Good calibration assures that the proper temperature is being maintained. If there is a variation between the reading on the thermometer and the reading on the thermostat, there may be some difficulty with the calibration. This will mean that the thermostat will have to be replaced. A homeowner has to be careful about the wiring of the thermostat, and be certain that the replacement thermostat has all the necessary wires attached to it. The new thermostat by the way must also have the same little rating as the one it is replacing. Checking to see if the thermostat is able to turn on and turn off the heating system is a final check to be sure that it is running properly.

 

Increase the Energy Efficiency

 

A good thermostat can make energy efficiency easier and maintain lower utility bills. Once a thermostat has to be replaced, a programmable model should be the new one. These models of thermostats can be programmed to lower the heating temperature in winter at times when no one is in the house, and then automatically increase the heat when the family is ordinarily at home. This little variation assures that only the heat that is necessary at a given time is in the house. It furthermore helps keep utility costs down because less energy is being expended. Maintenance of the thermostat doesn’t take a considerable amount of time nor any advanced expertise. It requires staying alert to any sudden variations in temperature in which the house is actually warmer than the temperature registered.